From the Bench
100 MSPS, 8-channel, 12-bit ADC board
Eight analog input channels, a 12-bit signal chain, and 100 MSPS sampling on one board, designed and built in-house. This page collects the board details and its key specifications.
Specifications
At a glance
The essentials for this board; the measured data follows below.
| Channels | 8 analog inputs |
|---|---|
| Resolution | 12-bit |
| Sampling rate | 100 MSPS |
Bring-up
Startup log
At power-up the FPGA aligns the ADC word boundaries, checks the test patterns on both channels, and reports the first throughput. This is the board’s own terminal output.
Real results, recorded from the board’s UART console during bring-up. The status lines are raw hex values from the alignment routine; the result is in the checks that follow, with zero test pattern errors on both ADCs.
FAQ
Common questions
What is this board?
It is an eight-channel, 12-bit acquisition board sampling at 100 MSPS, designed and built in-house. This page collects the board itself and its key specifications.
Was the board designed entirely in-house?
Yes. The board, its analog front-ends, and its bench bring-up were handled by one team, so the analog, layout, and measurement work stayed in one place.
Can you design a similar board for my application?
Yes. Every engagement starts from your specification: channel count, sample rate, resolution, and host interface. Send your requirements and you will get an approach and a timeline.
Contact
Need a board like this?
Send your spec or a rough idea and you’ll get an approach and a timeline, not a generic pitch.